Multi-Di@g J2534 FAQ-Multi diag J2534 VCI Serial Number

Many customers enter the wrong serial number when they firstly install? multi-diag access j2534 Pass-Thru OBD2 Interface, so the code they give us is wrong. Usually the wrong code is?19-*******SUU,but the normal code should be:?19-xxxxxxxSKL. So if our customer give the wrong code that the customer offers to our technician for activation, then it will appears a problem: when the customer use the activate code to handle his product then it will not read VCI and the product is unavailable. So if you find that the activate code is not?19-xxxxxxxSKL?then you should instantly change mutidiag J2534 VCI serial number as?070026. Sometimes you can not change the serial number, then you should uninstall the software which has been installed on your computer and install it again, finally you can fill the right serial number.

If you install multidiag J2534 for the first time, here are the steps for filling the right multidiag J2534 VCI serial number:

Step 1:during installation, when Mutli-Di@g configuration window appears, you should set Communication interface to USB.

Step2: set VCI serial number to?A070026(default)

For VCI not found problem. Maybe you think the device is broke as?Not Found VCI.

During testing take care that if there is USB or not in device manager. If usb cable doesn’t insert well then usb device can not be found and the software will hint Not Found VCI. Our factory technician has tested it and found that error, Not Found VCI, is because the usb cable did not be plugged tightly. So if you also met this error what you do is plugging the usb cable tightly.

For multi-diag access j2534 MULTI-DIAG J2534 version 2011,VCI serial number is?093479

Other multi-diag access j2534 OBD2 Device SP04 FAQ

Q:When using the product, it requires password and what it is?

A:Firstly remember to set VCI serial number as A070026 when you install the software, then it will give you a code.

Q:Is it necessary for COM cable?

A:No,it is not.COM cable can be used to connect directly.

Q:What is the latest version? How to update?

A: No update because the update will damage the device. The version is 2010-I.

Q:Does it work on W7 or VISTA?

A:No,just only Window XP system is OK.

The advantage of 2013-II version multidiag access j2534

multi-diag access j2534 (2013-II multidiag j2534), beside ECU reprogramming, with the help of muultidiag office software vehicle diagnostic, maintenance and repair operations can be done in just a few clicks without being an electronic expert. More than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions.

The advantage of 2013-II version multi-diag access j2534
1. Can be used on Win XP and Win 7 32bit(only 32bit)
2. Support Multi-Language
3. New Features: Update 19 brands car models – 190 new system:
Renault 41 new system
Peugeot 24 new system
Citro?n 25 new system
VOLVO 40 new system
Benz 15 new system
BMW4 new system
Nissan 5 new system
Fiat 14 new system
Kia 3 new system
Dacia 1 new system
Ford 1 new system
Toyota 1 new system
Lancia 5 new system
SAAB 1 new system
ALFA ROMEO 1 new system
OPEL 9 new system
Renault Samsung 2 new system
Hyundai 3 new system
SUZUKI 1 new system

How to activate the Actia Multi-Di@g Access J2534 Pass-Thru OBD2 Device

Recently some customers buy the multi-diag access j2534, after they install, it will need the password code. You can send us the code like: 19-xxxxxxxxSKL to us, we can activate it for you freely. But some customer always send us the code like: 19-cdd52831suu, 19-BF371F92CVD and so on.

Why they generate the wrong code, and how to get the correct code?
You get the wrong code because you enter wrong VCI, the correct VCI:070026
How to solve the problem of multi-diag access j2534?
If you send us the wrong code, we can also activate it for you. But it can’t work on your cars. In this case, you can enter the activation code and enter the screen like the picture show, clink the red signal, you can then correct the VCI:070026
Then you can send us the correct code for us to activate.

Multi diag J2534 VCI Serial Number and FAQ

Video of INstalling for 2013-II Multi-Di@g Access J2534 Pass-Thru OBD2 Device:

Why multi-diag access j2534 can not read VCI? Why multidiag J2534 is damage?

Many customers enter the wrong serial number when they firstly install multi-diag access j2534 Interface, so the code they give us is wrong. Usually the wrong code is 19-*******SUU,but the normal code should be: 19-xxxxxxxSKL. So if our customer give the wrong code that the customer offers to our technician for activation, then it will appears a problem: when the customer use the activate code to handle his product then it will not read VCI and the product is unavailable. So if you find that the activate code is not 19-xxxxxxxSKL then you should instantly change mutidiag J2534 VCI serial number as 070026. Sometimes you can not change the serial number, then you should uninstall the software which has been installed on your computer and install it again, finally you can fill the right serial number.

V2013-II Multi-Diag J2534 available on OBD365

The latest V2013-II Multi-Diag Access J2534 Pass-Thru Device is now available on OBD365 for US$329.

This new multi-diag access j2534 is a vehicle communication Interface that can be used on both Win XP and Win 7 32bit (only 32bit). It adds support for a lot of vehicles of 19 car brands and 190 new systems. This includes 41 Renault systems, 24 Peugeot systems, 40 Volvo systems, 4 BMW systems, 9 Opel systems, etc.

V2013-II multi-diag access j2534 allows mechanics to program ECU for vehicles with J2534 and J2534-I protocols. Apart from ECU programming, it can also do vehicle diagnostic, maintenance and repair operations in just a few clicks by Multi-Diag Office software. The diagnoses function covers systems such as air conditioning, pollution control, body, braking system, and so on.

2013.02V Multi-Di@g Access J2534 Pass-Thru OBD2 Device

multi-diag access j2534 which is the latest version is arrival. What is new features of this newest version? 2013.02V Multi-Di@g Access J2534 Pass-Thru OBD2 Device can be used on Win XP and Win 7 system,support more languages and more car models.The details as the following:

multi-diag access j2534 2013.02V Version Advantage:

1. Can be used on Win XP and Win 7 32bit(only 32bit)

2. Support Multi-Language

3. New Features: Update 19 brands car models – 190 new system:

Renault 41 new system

Peugeot 24 new system

Citroën 25 new system

VOLVO 40 new system

Benz 15 new system

BMW4 new system

Nissan 5 new system

Fiat 14 new system

Kia 3 new system

Dacia 1 new system

Ford 1 new system

Toyota 1 new system

Lancia 5 new system

SAAB 1 new system

ALFA ROMEO 1 new system

OPEL 9 new system

Renault Samsung 2 new system

Hyundai 3 new system

SUZUKI 1 new system

More car diagnostic tools: multi-diag access j2534

 

Multi-Diag Access J2534 Fits for the Idea of Low Carbon Dioxide

Society is rapid developed, while environment problem comes with it. And these years, there is an idea, low carbon dioxide style life. And as to vehicles, it is also a pollution origin. Therefore, an multi-diag access j2534 fitting for the idea of low carbon dioxide is necessary.
multi-diag access j2534 is catering for this idea, because in the part of is pollution control, it can work on the diagnosis of the particulate filter, electronic control of pollutant emissions and control of the Lambda probe.

In addition, it can maintain, work on air conditioning, liaison to the ground, body, post equipment, braking, motor and expert mode. And Multi-Di@g Access J2534 Pass-Thru OBD2 Device is 100% percent compatible with Passthru+ XS (also known as Multi-Di@g Access) by Actia. It meets the idea of low carbon dioxide style life with its presence of its functions.